Cylinder Removal and ReKeying Kit Schlage Keypad Deadbolts come standard with a 5pin solid brass Ckeyway cylinder. The rekeying steps are the same as for the Schlage B300 series deadbolt. Cylinder removal and replacement instructions are illustrated on the back page. A supplemental kit has been designed with replacement parts for the Keypad Locks and Deadbolts. Supplemental ReKeying Kit Part Number 38030 Keypad ReKeying Kit PART KIT REORDER NUMBER DESCRIPTION QTY. QTY. F605367 CYLINDER DRIVER BAR FOR KPL 10 100 B520628 WASHER FOR KPD TAILPIECE ...

FE575/FE595 DOOR PREPARATION INSTRUCTIONS FOR DOOR WITH EXISTING HOLES TOOLS NEEDED Drill Bits Needed: 2¹⁄₈” Hole Saw Pencil Chisel Tape M ¹⁄₈”, ⁷⁄₈”, 1” easure 1 MEASURE DOOR WIDTH 4 IF NEEDED, ENLARGE HOLE IN DOOR If the door is thinner than 1³⁄₈” or thicker than 1³⁄₄”, then the lock will not If hole in door is smaller than 2¹⁄₈”, then use 2¹⁄₈” hole saw to enlarge fit properly on the door. hole. 2¹⁄₈” 2¹⁄₈” Hole Saw 1³⁄₈” to 1³⁄₄” Tap M e easure 5 IF NEEDED, ENLARGE HOLE IN DOOR EDGE 2 If hole in door edge is smaller than ⁷⁄₈”, then use ⁷⁄₈”...

FE575/FE595 DOOR PREPARATION INSTRUCTIONS FOR DOOR WITH EXISTING HOLES TOOLS NEEDED Drill Bits Needed: 2¹⁄₈” Hole Saw Pencil Chisel Tape M ¹⁄₈”, ⁷⁄₈”, 1” easure 1 MEASURE DOOR WIDTH 4 IF NEEDED, ENLARGE HOLE IN DOOR If the door is thinner than 1³⁄₈” or thicker than 1³⁄₄”, then the lock will not If hole in door is smaller than 2¹⁄₈”, then use 2¹⁄₈” hole saw to enlarge fit properly on the door. hole. 2¹⁄₈” 2¹⁄₈” Hole Saw 1³⁄₈” to 1³⁄₄” Tap M e easure 5 IF NEEDED, ENLARGE HOLE IN DOOR EDGE 2 If hole in door edge is smaller than ⁷⁄₈”, then use ⁷⁄₈”...

Programmable Electronic Locks and Deadbolts Electronic locks for multifamily applications. Keep buildings secure and manage user access with Programmable Electronic Locks and Deadbolts Multifamily buildings come with a unique set of safety and security challenges. Schlage Programmable Electronic Locks and Deadbolts can be managed and programmed using our SMS software and SNAP programmer, making it easier than ever to provide controlled, credentialed access for residents, employees and service people throughout your complex or building. • Reside...

SCHLAGE® LINK. Access to a whole new level of freedom. Introducing SCHLAGE LINK. Now, no matter where you go, the front door is within reach. That’s because SCHLAGE LINK is more than a lockset. It’s a brilliant new way to enhance your home’s security, and your family’s peace of mind. On the surface, SCHLAGE LINK looks like a keypad entry lock — and it is. But it also features technology that allows you to use your cell phone or computer to remotely unlock your doors, monitor entry, and change user pass codes. You can even pair SCHLAGE LINK with...

MANUAL CALL POINT HFM/3/32/02 • ADM LOOP TECHNOLOGY WITH APOLLO/DISCOVERY PROTOCOL • Robust diecast aluminium case • LED indicates activation • Integrated dualisolator • Operating instructions by means of STANDARDISED SYMBOLS • INCREASE OF PROTECTION CLASS TO IP54 BY USING OPTIONAL PROTECTION KIT DESCRIPTION The manual call point according to EN 5411/B is desi is displayed by an LED. The detector is provided with a gned for use in ADM loops with Apollo/Discovery proto dualisolator, which disconnects the adjacent loop ele col and is accommodated...

MANUAL CALL POINT HFM/3/32/02 • ADM LOOP TECHNOLOGY WITH APOLLO/DISCOVERY PROTOCOL • Robust diecast aluminium case • LED indicates activation • Integrated dualisolator • Operating instructions by means of STANDARDISED SYMBOLS • INCREASE OF PROTECTION CLASS TO IP54 BY USING OPTIONAL PROTECTION KIT DESCRIPTION The manual call point according to EN 5411/B is desi is displayed by an LED. The detector is provided with a gned for use in ADM loops with Apollo/Discovery proto dualisolator, which disconnects the adjacent loop ele col and is accommodated...

MANUAL CALL POINT HFM/3/32/02 • ADM LOOP TECHNOLOGY WITH APOLLO/DISCOVERY PROTOCOL • Robust diecast aluminium case • LED indicates activation • Integrated dualisolator • Operating instructions by means of STANDARDISED SYMBOLS • INCREASE OF PROTECTION CLASS TO IP54 BY USING OPTIONAL PROTECTION KIT DESCRIPTION The manual call point according to EN 5411/B is desi is displayed by an LED. The detector is provided with a gned for use in ADM loops with Apollo/Discovery proto dualisolator, which disconnects the adjacent loop ele col and is accommodated...