MODEL #840116 _8" BENCH DRILL PRESS _ _INSTRUCTION MANUAL_ THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. _FOR CUSTOMER SERVICE_ _POUR LE SERVICE APRÉS VENTE_ 87190460957 IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE _OU DU CONSOMMATEUR_ KAWASAKI™ IS A TRADEMARK LICENSED BY...

COMPONENT #691295 3/8" RIGHT ANGLE ELECTRIC DRILL INSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. _FOR CUSTOMER SERVICE_ IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE _POUR LE SERVICE APRÉS VENTE_ 87190460957 PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STOR...

COMPONENT #840557 4 1/2" ANGLE GRINDER INSTRUCTION MANUAL _FOR CUSTOMER SERVICE_ _POUR LE SERVICE APRÉS VENTE_ _OU DU CONSOMMATEUR_ 87190460957 THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS _PARA EL SERVICIO_ KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT _PARA EL CONSUMIDOR_ MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJUR...

• MAINTAIN TOOLS WITH CARE. KEEP CUTTING TOOLS SHARP AND CLEAN. Properly maintained tools, with sharp cutting edge are less likely to bind and are easier to control. • CHECK FOR MISALIGNMENT OR BINDING OF MOVING PARTS, BREAKAGE OF PARTS, AND ANY other condition that may affect the toolʼs operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. • USE ONLY ACCESSORIES THAT ARE RECOMMENDED BY THE MANUFACTURER FOR YOUR MODEL. Accessories that may be suitable for one tool may create a risk of ...

B) DO NOT USE THE POWER TOOL IF THE SWITCH DOES NOT TURN IT ON AND OFF. _Any power tool_ _that cannot be controlled with the switch is dangerous and must be repaired._ C) DISCONNECT THE PLUG FROM THE POWER SOURCE AND/OR THE BATTERY PACK FROM THE power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. D) STORE IDLE POWER TOOLS OUT OF THE REACH OF CHILDREN AND DO NOT ALLOW PERSONS unfamiliar with the power tool or these instruc...

• USE ONLY ACCESSORIES THAT ARE RECOMMENDED BY THE MANUFACTURER FOR YOUR MODEL. Accessories that may be suitable for one tool may create a risk of injury when used on another tool. SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. • WHEN SERVICING A TOOL, USE ONLY IDENTICAL REPLACEMENT PARTS. FOLLOW INSTRUCTIONS IN THE MAINTENANCE SECTION OF THIS MANUAL. Use of unauthorized parts or failure to follow 12, 14, 18 VOLT CORDLESS DRIL...

UK IRELAND AUSTRALIA NEW ZEALAND 2 3 INTENDED USE PROTECTED SUPPLY. Use of an RCD reduces the risk of Your Black AVOID CONTACT. IF CONTACT tool with another. The declared vibration emission value may ACCIDENTALLY OCCURS, FLUSH WITH WATER. IF LIQUID also be used in a preliminary assessment of exposure. CONTACTS EYES, ADDITIONALLY SEEK MEDICAL HELP. Liquid ejected from the battery may cause irritation or burns. WARNING! The vibration emission value during actual use of 6. SERVICE the power tool can differ from the declared value depending A. HAVE...

OPERATION. IF DAMAGED, HAVE THE POWER TOOL REPAIRED BEFORE USE. Many accidents are caused by poorly maintained power tools. F) KEEP CUTTING TOOLS SHARP AND CLEAN. _Properly maintained cutting tools with sharp _ _cutting edges are less likely to bind and are easier to control._ G) USE THE POWER TOOL, ACCESSORIES AND TOOL BITS ETC., IN ACCORDANCE WITH THESE instructions, taking into account the working conditions and the work to be per formed. Use of the power tool for operations different from those intended could result in a hazardous situation...