2. Loosen the two screws in the clamping bracket, then place it over the windshield frame and mirror base at the selected location. (Figure 2) 3® OPTION 1 For windshield frames less than .450" thick, or a stepped frame (Figure 3), a small spacer of aluminum, plastic, or marine plywood may be used between the SKI MIRROR base and the windshield frame. 9083 OPTION 2 For windshields with a stepped frame (Figure 3), INSTALLATION INSTRUCTIONS using the mounting bracket as a template, mark the SAVE THESE INSTRUCTIONS width of the bracket on the windsh...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

Figure 2 Figure 1 FLUSH CLEAT TEMPLATES • • • Select an installation location that meets the following criteria: LOCATION power tools. servicing this product. Always remove the boat from the water before using any 120V AC To prevent personal injury, always disconnect the power source when • • • REQUIRED FOR INSTALLATION boat builder, boat dealer, or a qualified marine mechanic. NOTE: Attwood flush pullup cleats provide easy fittings for mooring and anchoring applications. APPLICATION Form Number 69343 Rev. G SAVE THESE INSTRUCTIONS (4.19cm) 3 t...

3 SKI TOW INSTALLATION INSTRUCTIONS ® NOTE: Before you drill or cut a hole in your boat, BE ABSOLUTELY CERTAIN there is room for the Ski Tow and the internal 21/2" x 5" (64mm x 127mm) Backing Plate. See Figure 2. 1. Carefully mark center of the hole. STAINLESS STEEL SKI TOW 2. Use a 21/8" (54mm) hole saw to cut hole for the Ski Tow. See INSTALLATION INSTRUCTIONS Figure 2. 3. Separate fasteners and Backing Plate from the Ski Tow and set aside. Apply a small bead of marine sealant to the groove under 66448 SERIES the Ski Tow flange. Place Ski Tow...