V3800 Manuals








Care and Cleaning
Features of Your FoodSaver® Appliance
Features of Your FoodSaver® Appliance
To Clean Appliance: 
9
Open appliance door (D), while holding the appliance with two hands, press two Release Buttons (K) with your 
Seal 
Indicator
2
thumbs, rotate appliance away from you, and allow appliance to rest on the counter. After cleaning, hold appliance 
Button
Tray Full
LEDs
PulseVac™
with two hands and rotate upright until the latches lock.
Quick Start Guide 
Indicator
LED*
10
Check Foam Gasket (M) around Drip Tray (O) and Upper Gasket (Q) which surrounds the Upper Bag Detection Tray (P) 
Vacuum
Progress
to make sure they are free from food materials and the lower Foam Gasket is properly inserted into gasket channel.
& User Manual
H.  Built-in Roll Holder
V3860
Display
For storage of FoodSaver® 
Vacuum Sealing Rolls. 
For important product maintenance information and helpful tips, please refer to the FoodSaver® Reference Guide 
for V3800 series appliances
included in your kit.
Power Button
Marinate Canister
Speed
Adjustable
Cancel
PulseVac™ 
I.  Roll Cutter
Mode
Mode
Settings Food Settings Button
Button*
Seal Indicator
Simplifies making 
1
Antibacterial Drip Tray & Upper Bag Detection Tray
3
4
5
6
7
8
11
Registering your appliance is quick and easy at www.prodregister.com/foodsaver. If you register on our website, 
custom-sized bags.
Empty Drip Tray after each use (See Fig. 7). Wash in warm soapy water or place in top rack of dishwasher. The Food 
you will have the opportunity to receive special bag and accessory introductory offers. Refer to the registration card 
Sensors in the Drip Tray (O) will not function correctly if liquid is allowed to remain in Drip Tray.
in the box.
1
POWER BUTTON: 
The Moist Food Indicator light will flash when Food 
For more usage tips and safety information, please refer to the FoodSaver® Reference Guide or visit our website at 
J.  Auto Bag Sensing
Press the power button to begin. The Power Indicator, 
Sealing Sensors automatically detect any moisture or 
This appliance has a Tray Full indicator  2 . When excess liquid fills the Drip Tray, the unit will turn off and the Tray 
www.foodsaver.com.
Simply insert open end of bag 
Speed Indicator and Food Indicator lights will become 
liquid in the drip tray (O). Note: Appliance will default 
Full Indicator light will activate. To resume normal operation, open Appliance Door (D), press two release buttons 
into the vacuum channel and the 
illuminated. After Vacuum Sealing, press Power Button 
to Dry setting upon pressing the Power Button or when 
(K), rotate appliance away from you, and allow appliance to rest on the counter. Remove the Drip Tray, empty
machine will sense and grasp the 
to turn appliance Off. Note: After 12 minutes, the
power has been interrupted, unless liquid is detected 
appliance will turn Off automatically.
liquid, clean Drip Tray and replace in housing. When replacing drip tray, set the right end of the drip tray into place, 
bag, vacuum, seal and shut-off 
in the Drip Tray. (See Care and Cleaning section of this 
Quick Start Guide).
then firmly snap the left side down (See Fig. 8). Appliance can be used without Drip Tray, however the Adjustable 
Features of Your FoodSaver® Appliance
automatically.
2
TRAY FULL INDICATOR LIGHT: 
Food Sensor setting  6  will not function without the Drip Tray. 
7
During the vacuum sealing process, small amounts of 
CANCEL BUTTON
K.  Release Buttons 
liquids, crumbs or food particles can be inadvertently 
Immediately halts the current function opening the 
Remove For Cleaning
Firmly Snap in Place
A.  Controls and Indicator Lights
To open appliance 
pulled into the Drip Tray (O). When excess liquid fills 
Vacuum Channel.
To indicate current setting, vacuum 
the Drip Tray, the unit will turn off and the Tray Full 
for cleaning.
progress and for added control.
8
Indicator  2  will activate. To resume normal operation, 
PAUSE OR PulseVac™ CONTROL BUTTON 
remove the Drip Tray, empty liquid, wash in warm 
(*not available on all models) 
L.  Appliance Door 
soapy water or place in top rack of dishwasher. Dry and 
Use to manually control the vacuum process and 
B.  Vacuum Progress Display 
Opens to access Built-in 
replace Drip Tray in trough. (See Care and Cleaning)
avoid crushing delicate items. See tips section for
Blue lights signal progression of
Roll Holder and Cutter.
further information.
vacuuming and sealing process.
3
MARINATE MODE BUTTON 
All lights extinguish when the full
9
A ten minute predetermined sequence of vacuum pulse 
SEAL BUTTON 
process is finished. 
to rest ratio allowing foods to get optimum flavor
CrushFree™ Instant Seal feature-
infusion in the least amount of time. See “Marinating 
This button has four uses:
Fig. 7
Fig. 8
C.  Seal Button 
with your FoodSaver®” section on page 5.
CrushFree™ Instant Seal feature. 
1.  Press to immediately stop the vacuum process 
Clean Upper Bag Detection Tray after each use. The Upper Bag Detection Tray (P) is removable for cleaning, remove 
M. Foam Gasket
Prevents crushing delicate items.
and begin sealing the bag. This prevents crushing 
4
CANISTER MODE BUTTON 
by lifting the tabs on each end. Do not pull on the Upper Bag Detection Flags to remove the Upper Bag Detection 
Press to achieve best vacuum for canisters and 
delicate items such as bread, cookies and pastries. 
Tray. Clean Upper Bag Detection Tray by washing in warm soapy water or placing in top rack of dishwasher. Upper 
D.  Appliance Door 
N.  Extra-wide Sealing Strip with 
accessories. Push Canister Vacuum Button  4  to begin 
Bag Detection Tray MUST be inserted to use the appliance. Without the Upper Bag Detection Tray, your FoodSaver® 
Opens to access Built-in Roll Holder 
Non-stick Coating
2.  Press to create a seal when making bags from a 
vacuum process. Motor will run until Vacuum Sealing 
FoodSaver® Roll. 
Appliance will not detect bag when inserted in the Vacuum Channel (E).
and Cutter.
Provides extra secure, airtight
Process is complete.
seal that’s two times wider.
E.  Vacuum Channel 
3.  Press to create a seal on Mylar bags (such as a 
5
SPEED SETTINGS BUTTON
Simply insert bag and the FoodSaver® 
potato chip bag) to keep food sealed airtight. 
O.  Drip Tray
When vacuum sealing delicate items, press Speed 
appliance does the rest.
Catches overflow liquids 
Setting Button  5  so that the gentle speed indicator 
4. Press during PulseVac™ mode to seal bag.
For important safety information and helpful tips, please refer to 
light is illuminated. For more control you may press 
F.  Retractable Accessory Hose/
and contains Food Sensors 
the FoodSaver® Reference Guide included in your kit. 
Seal Button  9  at any time to stop vacuum and begin 
VACUUM PROGRESS DISPLAY
Accessory Port
to detect liquid. 
10
Questions? Visit us at www.foodsaver.com to get tips on vacuum sealing and 
automatic sealing process. Note: Appliance will default 
Displays vacuum levels as the bag/canister is 
Accessory hose can be used with all 
order FoodSaver® brand accessories, bags and rolls, or call 1-877-777-8042 (U.S.).
to Normal speed upon pressing the Power On Button or 
evacuated. 
FoodSaver® Brand Accessories.
P. Upper Bag Detection Tray
when power has been interrupted.
G.  Integrated Bag Opener
11
SEAL INDICATOR LIGHT 
Q. Upper Gasket
6
ADJUSTABLE FOOD SETTINGS BUTTON
Quick and convenient, opens sealed 
Constant Red light indicates sealing process is 
For optimal vacuuming and sealing of moist or juicy 
engaged. (Flashing light indicates error)
©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. 
bags with ease.
R. Rubber Seal Profile
foods, press the Adjustable Food Setting Button  6  
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden 
Consumer Solutions, Boca Raton, Florida 33431.
until the Moist Indicator Light is illuminated. Choose the 
P.N.128164
dry food setting for foods without liquid.
Printed in China.
T180-00455
2
3
FSV3800.indd   5-2
FSV3800.indd   5-2
5/27/08   4:58:00 PM
5/27/08   4:58:00 PM


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

41 41 50 50

Designated trademarks and brands are the property of their respective owners | Disclaimer