SE-520MA Manuals


Battery
SE-520MA
2/10 Amp
12 Volt
Charger
SE-5212A
2/10/50 Amp
12 Volt
Owner's Manual
SE-1275A
2/12/75 Amp
12 Volt
Models:
–Save–
Important Safety Instructions
Read Rules for Safe Operation and Instructions Carefully
Working in vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal
battery operation. For this reason, it is of utmost importance that each time before using your charger, you
read this manual and follow the instructions exactly.
WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a
chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
A.
IMPORTANT SAFETY INSTRUCTIONS
1.
SAVE THESE INSTRUCTIONS - This manual contains
(b) That extension cord is properly wired and in good
important safety and operating instructions for battery
electrical condition;and
charger Models: SE-520MA, SE-5212A  and SE-1275A.
(c) That wire size is large enough for AC ampere rating of
A BATTERY CHARGER RECEIVES AC POWER FROM
charger as specified below:
THE ELECTRIC OUTLET AND DELIVERS DC CUR-
RENT TO THE BATTERY.
AC INPUT RATING, AMPERES
AWG SIZE OF CORD
2.
Before using battery charger, read all instructions and
Equal to or
but less than
Length of Cord, Feet
cautionary markings on (1 ) battery charger, (2) battery
Greater than
25
50
100 150
and (3) product using battery.
0
2
18
18
18
16
3.
CAUTION - To reduce risk of injury, charge only lead
2
3
18
18
 18
14
acid type rechargeable batteries: Other types of batter-
6
8
18
16
 12
10
ies may burst causing personal injury and damage.
4.
Do not expose to rain or snow.
9.
Do not operate charger with damaged cord or plug -
5.
Use of an attachment not recommended or sold by the
replace it immediately.
battery charger manufacturer may result in a risk of fire,
10. Do not operate charger if it has received a sharp blow,
electric shock, or injury to persons.
been dropped or otherwise damaged in any way; take it
6.
To reduce risk of damage to electric plug and cord, pull
to a qualified serviceman.
by plug rather than cord when disconnecting charger.
11. Do not disassemble charger; take it to a qualified
7.
Make sure cord is located so that it will not be stepped
serviceman when service or repair is required. Incorrect
on, tripped over, or otherwise subjected to damage or
reassembly may result in a risk of electric shock or fire.
stress.
12. To reduce risk of electric shock, unplug charger from
8.
An extension cord should not be used unless absolutely
outlet before attempting any maintenance or cleaning.
necessary. Use of improper extension cord could result
Turning off controls will not reduce this risk.
in a risk of fire and electric shock. If extension cord must
be used, make sure:
(a) That pins on plug of extension cord are the same
number, size and shape as those of plug on charger;
SCHUMACHER ELECTRIC CORPORATION
801 BUSINESS CENTER DRIVE • MOUNT PROSPECT, ILLINOIS 60056-2179
Send Warranty Product Repairs to: 1025 E. Thompson, Hoopeston, IL 60942-0280
Call Customer Service if you have questions: 1-800-621-5485
00-00-000579/0103
1


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

41 41 52 52

Designated trademarks and brands are the property of their respective owners | Disclaimer