RN8803G-RB Manuals

Technical data sheet for
RN8800G-B, RN8800G-CB, RN8800G-LS, RN8800G-RB, 
RN8803G-B, RN8803G-CB, RN8803G-LS, RN8803G-RB, 
RN8806G-B, RN8806G-CB, RN8806G-LS, RN8806G-RB, 
RN8809G-B, RN8809G-CB, RN8809G-LS, RN8809G,RB
 Heavy-duty construction
  28 MJ/hr open burners
  Flame failure standard
  Pilot burners optional  
  300mm, 600mm, and 900mm griddle plate options
  Optional Simmer plates
  3 models of base unit
  1 model of ventilated refrigeration base with    
  Stainless steel exterior
 Easy clean
 Easy service
 Fully modular
Overall Construction
Refrigerated base (supplied as –RB model)
• Self contained suite matched modular base 
• Welded hob with 1.5mm 304 stainless steel bull nose 
• Ventilated system with R134a refrigerant
• Splashback and side panels 1.2mm 304 stainless steel
• -2˚ to + 8˚C temperature (Tropical Climate rated)
• Front panels 0.9mm 304 stainless steel
• Two GN 1/1 drawers and one door standard
• Aluminised steel internal construction 
• 100mm deep pan drawer capacity
• Cast iron 28MJ/hr open burners with forged brass cap
• Heavy-duty European telescopic drawer guides
• Vitreous enamel ed cast iron potstands
• Magnetic drawer gaskets (replaceable without tools)
• Vitreous enamel ed open burner spill covers
• 50mm fully foamed CFC free insulation
• Cast iron simmer plates (optional extra)
• 304 stainless steel exterior and interior
• 12mm thick mild steel griddle plate
• Anti-corrosion treated evaporator
• 2.5mm 304 stainless steel griddle splash guards 
• No condensate drain required
• Vitreous enamel ed spill trays  
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
 adjustable feet 
Griddle sections are standard on RH side. Available on LH side to 
order or by conversion. 
• Condensing unit removable through front of unit for service
Bench mount (supplied as –B model)
• Easy clean interior
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs   
 with adjustable feet
• Adjustable height 80mm – 105mm
• Variable high to low controls to open burners
Cabinet base (supplied as –CB model)
• Open burners flame failure standard with pilot burners optional 
• Fully modular for match suite finish
• Variable high to low controls to griddles
• Double skin 0.9mm 304 stainless steel interior and exterior
• Griddles standard with pilot, flame failure and piezo ignition
• Optional GN 1/1  4 position racking kit (1 or 2 cabinet bays)
• Large easy use control knob - heat resistant reinforced
• Up to eight 65mm GN 1/1 capacity
• Easy view control settings on knob  
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
Refrigerated base
 adjustable feet 
• Digital control electronic thermostat
Leg stand (supplied as –LS model)
• Automatic defrost 
• Fully modular for matched suite finish
• Automatic evaporation of defrost water 
• Framed top for connection to Cooktop 
• -2˚ to +8˚C temperature range
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
 adjustable feet
Cleaning and Servicing 
• Fully modular framed stand shelf with 0.9mm 304 stainless steel finish • All models with easy clean stainless steel external finish
• Shelf to top stainless steel backstop panel for convenience and rigidity  • Lift off burners heads and vitreous enamel ed burner spill covers
• Suitable for rear or through shelf gas connection to Cooktop 
• Vitreous enamel ed spill trays under open burner and griddle sections
• Quick assembly design (no tools required)
• Access to all parts from front of unit
• Refrigerated Base condenser removable through front of unit

Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

43 43 45 45

Designated trademarks and brands are the property of their respective owners | Disclaimer