RCD904 Manuals


English
5
6
English
AM/FM TUNER

Press the Stop / Eject Key (36) when finished. Otherwise the tape will stop automatically
when the end of the tape is reached.
OPERATION

Press the STANDBY/ON Button (16) to ON . The Standby indicator (19) will go off.
CONTINUOUS PLAYBACK ( ONLY RUNNING FROM TAPE DECK B TO A )

Set the Function Selector (14) to the TUNER position.

Set the Function Selector (14) to the TAPE position.

Select the desired frequency band with the Band Selector  (28).

Insert your cassette tapes.

Tune to the desired radio station by turning the Tuning control (29).

Press the PLAY Key (33) of deck B.

Press the STANDBY/ON  Button to OFF.

Press the PAUSE Key (8) and the PLAY Key (4) of deck A.

Deck B will now proceed to play its side.
ANTENNA

Adjust the VOLUME (24) control to the preferred level.

For FM reception there is a built-in FM antenna wire at the rear of the unit. Move the wire

When Tape Deck B has finished playing, it will stop. Tape Deck A then starts playing
around to obtain the best reception.
back automatically.

For AM reception the signals are picked up through a built-in ferrite antenna. Your may

When Tape A reaches its end, it automatically stops.
have to orient the unit to obtain the best reception.
RECORDING (ONLY ON TAPE DECK A)
FM & FM-STEREO RECEPTION

Stereo reception is possible when the tuned FM station is  broadcasting in stereo.

This unit has Automatic Level Control circuitry. This means that the recording level is

When the FM Stereo button (26) is “up” and the station is broadcasting in Stereo, the
set automatically. The volume or tone controls will not affect the recording.
STEREO indicator (18) lights up.

Record Key will not be pressed down when the record prevention tab is broken or

 When FM stations are weak and are disturbed, listening can be improved by pressing
removed from the tape.
down the FM STEREO selector (26). Reception will then be in MONO.
RECORDING FROM THE RADIO
CASSETTE OPERATION

Set the Function Selector (14) to the TUNER position.

Tune in your station using the TUNING Control (29) and put in your blank cassette tape
INSERTION AND REMOVAL OF CASSETTES
in cassette compartment “A” (9).

Press the STANDBY/ON  Button (16) to ON . The Standby indicator will go off.

Press the Record Key (3) and the Play Key (4) at the same time on Tape Deck A to start

Set the Function Selector (14) to the TAPE position.
recording.

Press the Stop / Eject Key (36) to open the Cassette Door of Compartment B.

Press the Stop / Eject Key ( 7) when finished. Otherwise the tape will stop automatically
• Slip your cassette tape into the door, with the exposed section facing downward
when the end of the tape is reached.
and side A with full spool of tape on left side facing you.

Close the Cassette Door securely.
RECORDING FROM THE CD

When finished, press the Stop / Eject Key to open the Cassette Door, and retrieve your

Set the Function Selector (14) to the CD position.
cassette tape.

Put in your blank cassette tape in cassette compartment “A” (9).
PLAYBACK

Select the CD (1,2 or 3) you want to play/record with the Disc Selector button (39).

Set the Function Selector (14) to the TAPE position.
Press the Record Key (3) and the Play Key (4) at the same time on Tape Deck A to start

Insert your cassette tape in the Compartment B.
recording. Press Play/Pause Key (27) on the CD player.

Press the Play Key (33) to activate playback.

Press the Stop / Eject Key ( 7) when finished. Otherwise the tape will stop automatically

Use the Pause Key (37) whenever you want to suspend playback.
when the end of the tape is reached.

Document Outline


36 36 52 52

Designated trademarks and brands are the property of their respective owners | Disclaimer