Rampage ACC-31 Manuals


PROCEDURE FOR VERTICAL INSTALLATION
Note
If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 4), start with step 2.
1
Set the anti-vibration springs to position "V"
2
Attach a mounting bracket to each side of the unit, using
as shown below .
the hex head bolts and washers.
POSITION
"V"
Bracket
Bracket
Hex head bolt
and washer
Determine the mounting location  and drill two mounting holes.
3
4
Mount the unit in place, using two self-tapping Phillips head
screws.
Use RTV (silicone sealer) on screw threads or around
the holes to prevent moisture intrusion.
NOTE: If mounting surface is carpeted, use caution
when drilling holes to prevent drill bit from
catching on carpet.  Cut holes in carpet
before drilling into sub-surface.
Self-tapping
Phillips head
WARNING
screw
Never mount the unit near the fuel tank.
Bracket
Bracket
Carpet
Drill holes 1/8" (4mm) in diameter.
Hex head bolt
and washer
5


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

39 39 53 53

Designated trademarks and brands are the property of their respective owners | Disclaimer