PPDLEQB1 Manuals


1. The 7-band EQ Faders allow boosting/cutting single 
frequency ranges from 50 Hz to 10 kHz at+/-15 dB. 
2. The LEVEL fader adjusts the output level. It can be used 
to achieve effective volume boost or cut . 
3. The ON/BATT LED illuminates when the effect is 
activated. It also serves as a battery level indicator. 
4. Use the Footswitch to activate/deactivate the effect. 
5. Use this 1/4 TS IN connector to plug in the instrument 
6. The 1/4 TS OUT connector sends the signal to your amp.  
  Use the DC IN connection to plug in a 9v power supply (not included). The Battery Compartment is 
located underneath the pedal cover. To install or replace the 9v battery, press the hinges with a pen 
and remove the pedal cover. 
This effects pedal has no on/off switch. As soon as you insert the jack into the Input connector, the 
pedal will turn on. When not in use, remove the jack from the input connector to save the batteries. 
Input Connector: 1/4 TS Impedance 500k 
Output Connector: 1/4 TS Impedance 1k 
Power Supply: 9V, 100mA DC regulated 
Power Connector: 2mm DC Jack, Negative Center 
Battery: 9v Type 6LR61 
Power Consumption: 30mA 
Dimensions: 4.9”D x 2.76”W x 2.12”H 
Weight approx. 0.33kg (0.73lbs) 
Do not use near water, or install near heat sources. Use only authorized attachments / accessories. 
Do not service product yourself. Contact our service department with any questions or to schedule 
repair service. 


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

38 38 46 46

Designated trademarks and brands are the property of their respective owners | Disclaimer