PLC-XT10 Manuals


TO THE OWNER
Before operating this projector, read this manual thoroughly and operate the projector properly.  
This projector provides many convenient features and functions.  Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try
the solutions in the “TROUBLESHOOTING” section at the end of this booklet.  If the problem still persists, contact the
sales dealer where you purchased the projector or the service center.
SAFETY PRECAUTIONS
WARNING :  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
q This projector produces intense light from the projection lens.  Do not stare directly into the lens as possible.
Eye damage could result.  Be especially careful that children do not stare directly into the beam.
q Do not use projectors with whiteboards that produce a very bright glare or 'hot spot'. This seems to happen
most on shiny surfaces. 
q This projector should be set in the way indicated.  If not, it may result in a fire hazard.
q Take appropriate space on the top, sides and rear of the projector
SIDE and TOP
REAR
cabinet for allowing air circulation and cooling the projector. 20cm
Minimum distance should be taken.  If the projector is to be built
into a compartment or similarly enclosed, the minimum distances
must be maintained.  Do not cover the ventilation slot on the
projector.  Heat build-up can reduce the service life of your
50cm
50cm
50cm
projector, and can also be dangerous.
q Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation
holes.
q Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser
Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate
laser emission).  Do not look into Laser Light Window or shine the laser beam on yourself or other people.  Eye
damage may result.
q If the projector is not to be used for an extended time, unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-
SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.  REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
SHOCK IS PRESENT WITHIN THIS UNIT.
OWNER'S MANUAL WITH THIS UNIT.
2


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

36 36 47 47

Designated trademarks and brands are the property of their respective owners | Disclaimer