PD600G Manuals


• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may create a risk of injury when used on
another tool.
Service
• Tool service must be performed only by qualified repair personnel. 
Service or
maintenance performed by unqualified personnel may result in a risk of injury.
CORDLESS SCREWDRIVER
• When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual. Use of unauthorized parts or failure to follow
Catalog No. PD600, PD600G
Maintenance Instructions may create a risk of shock or injury.
Specific Safety Rules
• Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed
metal parts of the tool "live" and shock the operator.
First Aid Measures for Gel Components (PD600G Only)
If gel within the comfort grip becomes exposed and results in skin contact wash with soap and
water; for eye contact, flush with flowing water. If swallowed, seek medical attention.
Material Safety Data Sheet (MSDS) available from 1-800-544-6986.
The label on your tool may include the following symbols.
V ..........................volts
A..........................amperes
INSTRUCTION MANUAL
Hz ........................hertz
W ........................watts
min ........................minutes
......................alternating current
......................direct current
no ........................no load speed
B E F O R E   R E T U R N I N G   T H I S   P R O D U C T  
..........................Class II Construction
........................earthing terminal
F O R   A N Y   R E A S O N   P L E A S E   C A L L
........................safety alert symbol
.../min ..................revolutions or 
reciprocations
per minute

1 - 8 0 0 - 5 4 4 - 6 9 8 6
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other 
construction activities contains chemicals known to cause cancer, birth defects or other 
IF YOU SHOULD HAVE A QUESTION OR 
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
EXPERIENCE A PROBLEM WITH YOUR 
• crystalline silica from bricks and cement and other masonry products, and 
BLACK & DECKER PRODUCT,
• arsenic and chromium from chemically-treated lumber (CCA).
C A L L   1 - 8 0 0 - 5 4 4 - 6 9 8 6
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals:  work in a well ventilated area, and work with
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No.,
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
TYPE No., AND DATE CODE (e.g. 0130M). IN MOST CASES, A BLACK & DECKER REPRE-
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
SENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGES-
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water. 
Allowing dust to get into your mouth, eyes, or lay on the skin may
TION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause serious
and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory 
SAVE THIS MANUAL FOR FUTURE REFERENCE.
protection appropriate for the dust exposure. Direct particles away from face and body.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO. 
D
Cat No. PD600, PD600G Form No. 5145342-00   (NOV-04)  Copyright © 2004 Black & Decker   Printed in China
F
A
B
GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS
E
G
H
C
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious 
personal injury.
FEATURES
SAVE THESE INSTRUCTIONS
- Quick Release Collar
- Torque Control Collar
Work Area
- LED Light
• Keep your work area clean and well lit. Cluttered benches and dark areas invite
- Two Speed Switch
accidents.
- Accessory Holder
• Do not operate power tools in explosive atmospheres, such as in the presence of
- Pivot Button
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or
- Charging Port
1
fumes.
- Forward / Reverse Switch
2
• Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
• A battery operated tool with integral batteries or a separate battery pack must be

recharged only with the specified charger for the battery. A charger that may be suitable
3
for one type of battery may create a risk of fire when used with another battery.
• Use battery operated tool only with specifically designated battery pack. Use of any
other batteries may create a risk of fire.
5
Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use tool while tired or under the influence of drugs, alcohol, or
4
medication. A moment of inattention while operating power tools may result in serious
personal injury,
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair
Safety Warnings and Instructions: Charging 
can be caught in moving parts.
1. This manual contains important safety and operating instructions.
• Avoid accidental starting. Be sure switch is in the locked or off position before
2. Before using battery charger, read all instructions and cautionary warnings on battery
inserting battery pack. Carrying tools with your finger on the switch or inserting the battery
charger and product using battery. 
CAUTION: To reduce the risk of injury, use charger
pack into a tool with the  switch on invites accidents.
only with this product. Batteries in other products may burst causing personal injury or 
• Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that
damage.
is left attached to a rotating part of the tool may result in personal injury.
3. Do not expose charger to rain or snow.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and
4. Use of an attachment not recommended or sold by Black & Decker may result in a risk
of fire, electric shock, or injury to persons.
balance enable better control of the tool in unexpected situations.
5. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when 
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
disconnecting charger.
hard hat, or hearing protection must be used for appropriate conditions.
6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise 
Tool Use and Care
subjected to damage or stress.
• Use clamps or other practical way to secure and support the workpiece to a stable
7. An extension cord should not be used unless absolutely necessary. Use of improper
platform. Holding the work by hand or against your body is unstable and may lead to loss of
extension cord could result in a risk of fire, electric shock or electrocution.
control.
a.  Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed
extension  cords should be used, and we recommend that they be listed by
• Do not force tool. Use the correct tool for your application. The correct tool will do the
Underwriters Laboratories (U.L.). If the extension is to be used outside, the cord must
job better and safer at the rate for which it is designed.
be suitable for outdoor use. Any cord marked for outdoor use can also be used for
• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with
indoor work. The letters "W" or "WA" on the cord jacket indicate that the cord is suitable
the switch is dangerous and must be repaired.
for outdoor use.
• Disconnect battery pack from  tool or place the switch in the locked or off position
b.   An extension cord must have adequate wire size (AWG or American Wire Gauge) for
before making any adjustments, changing accessories, or storing the tool. Such
safety, and to prevent loss of power and overheating. The smaller the gauge number of
the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than
preventive safety measures reduce the risk of starting the tool accidentally.
18 gauge. When using more than one extension to make up the total length, be sure
• Store idle tools out of reach of children and other untrained persons. Tools are
each extension contains at least the minimum wire size.
dangerous in the hands of untrained users.
• When battery pack is not in use, keep it away from other metal objects like: paper
Minimum Gage for Cord Sets
clips, coins, keys, nails, screws or other small metal objects that can make a
Volts
Total Length of Cord in Feet
connection from one terminal to another. Shorting the battery terminals together may
120V
0-25
26-50
51-100
101-150
cause sparks, burns, or a fire.
240V
0-50
51-100 101-200
201-300
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools,
Ampere Rating
with sharp cutting edge are less likely to bind and are easier to control.
More
Not more
American Wire Gage
Than
Than
• Check for misalignment or binding of moving parts, breakage of parts, and any other
0
-
6
18
16
16
14
condition that may affect the tool’s operation. If damaged, have the tool serviced
6
-
10
18
16
14
12
before using. Many accidents are caused by poorly maintained tools.
10 -
12
16
16
14
12
12 -
16
14
12
Not Recommended


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

41 41 47 47

Designated trademarks and brands are the property of their respective owners | Disclaimer