JTP70SPSS Manuals
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
JTP70SP
5
GE® 30" Built-In Single Convection Wall Oven
23-1/2'' MIN.
Dimensions and Instal ation Information (in inches)
Cutout width
Cutout depth
Junction
28-1/2'' MIN.
29-3/4
box
KW Rating
28-5/8'' MAX.
5
location
240V
4.5
CL
2 x 4 or
A
23-1/2'' MIN.
208V
3.4
equivalent
Cutout depth
Junction
runners
29-3/4
box
Breaker
B Size
location
CL
2 x 4 or
A
240V
20 Amps
equivalent
runners
22'' MIN.
B
Conduit
27-1/4'' MIN.
208V
20 Amps
22'' MIN.
27-5/16'' MAX.
Conduit
27-1/4'' MIN.
C
(72"
C
48-1/2"
27-5/16'' MAX.
long)
Most 30" Wall Cabinets can
Cutout height be used with this unit.
Cutout height
Note: These ovens are not approved for stackable
Suitable
bracing
21-5/8"
installations.
Suitable
to support
over centerline
runners
of cabinet
bracing
Note: Cabinets instal ed adjacent to wal ovens
(must support 275 lbs.)
21-5/8"
Recommended
to support
must have an adhesion spec of at least a 194°F
over centerline
cutout location
temperature rating.
runners
of cabinet
32-1/2"
(must support 275 lbs.)
21
from floor
Door handle protrudes 3" from
Recommended door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
cutout location
placed to avoid interference with the handle.
30
Allow minimum of 21'' for clearance
Installation Information:
32-1/2" Before installing, consult
to adjacent corners, drawers, walls, or etc.
21
instal ation instructions pac
from floor ked with product for
A=Allow 1" overlap of oven over top and bottom edges of cutout.
current dimensional data.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Electric wal ovens are not approved for instal ation
with a plug and receptacle. They must be hard
wired in accordance with installation instructions.
Side-by-side installations require at least 2"
30
Allow minimum of 21'' for clearance
between cutouts.
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 5/09
320227
Big size of image:
Please install Flash player from http://get.adobe.com/flashplayer/!
28-1/2'' MIN.
28-5/8'' MAX.
JTP70SP
5
GE® 30" Built-In Single Convection Wall Oven
23-1/2'' MIN.
Dimensions and Instal ation Information (in inches)
Cutout width
Cutout depth
Junction
28-1/2'' MIN.
29-3/4
box
KW Rating
28-5/8'' MAX.
5
location
240V
4.5
CL
2 x 4 or
A
23-1/2'' MIN.
208V
3.4
equivalent
Cutout depth
Junction
runners
29-3/4
box
Breaker
B Size
location
CL
2 x 4 or
A
240V
20 Amps
equivalent
runners
22'' MIN.
B
Conduit
27-1/4'' MIN.
208V
20 Amps
22'' MIN.
27-5/16'' MAX.
Conduit
27-1/4'' MIN.
C
(72"
C
48-1/2"
27-5/16'' MAX.
long)
Most 30" Wall Cabinets can
Cutout height be used with this unit.
Cutout height
Note: These ovens are not approved for stackable
Suitable
bracing
21-5/8"
installations.
Suitable
to support
over centerline
runners
of cabinet
bracing
Note: Cabinets instal ed adjacent to wal ovens
(must support 275 lbs.)
21-5/8"
Recommended
to support
must have an adhesion spec of at least a 194°F
over centerline
cutout location
temperature rating.
runners
of cabinet
32-1/2"
(must support 275 lbs.)
21
from floor
Door handle protrudes 3" from
Recommended door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
cutout location
placed to avoid interference with the handle.
30
Allow minimum of 21'' for clearance
Installation Information:
32-1/2" Before installing, consult
to adjacent corners, drawers, walls, or etc.
21
instal ation instructions pac
from floor ked with product for
A=Allow 1" overlap of oven over top and bottom edges of cutout.
current dimensional data.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Electric wal ovens are not approved for instal ation
with a plug and receptacle. They must be hard
wired in accordance with installation instructions.
Side-by-side installations require at least 2"
30
Allow minimum of 21'' for clearance
between cutouts.
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 5/09
320227
Big size of image:
Please install Flash player from http://get.adobe.com/flashplayer/!