Hampton 4751.732 Manuals


Installation
Instructions
4751.702
KITCHEN FAUCETS
4751.712
4751.722

with EverClean™ Finish
4751.732
Congratulations on purchasing your American Standard faucet with
EverClean finish found only on American Standard faucets.

EverClean Finish
•  One wipe effortlessly removes spots
•  Eliminates the need for cleaners and scrubbing
•  Permanent surface protectant remains beautiful for the life of the faucet
Certified to comply with ASME A112.18.1M
•  EverClean™ available on:  Polished Chrome, Satin Nickel, Stainless Steel,
   Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
TOOLS REQUIRED
Flat Blade Screwdriver
Adjustable Wrench
Phillips Screwdriver
Plumbers' Putty or Caulking
Channel Locks
INSTALL FAUCET
CAUTION
Turn off hot and cold water
supplies before beginning.

Install LOCK NUT (1) and RUBBER WASHER (2) onto SPOUT BODY (3).
5
Insert SPOUT BODY (1) through hole from underside of SINK.
4
Place RUBBER RING (4) into SPOUT ESCUTCHEON (5) and screw
ESCUTCHEON (5) onto SPOUT BODY (3) until snug against
internal stop.
From under sink tighten LOCK NUT (1) to secure SPOUT. 
3
2
1
INSTALL VALVE BODIES
Install LOCK NUT (1) and RUBBER WASHER (2) onto VALVE BODIES (3).
5
Insert VALVE BODY (3) through hole from underside of SINK.
4
Place RUBBER RING (4) into ESCUTCHEON (5) and screw
ESCUTCHEON (5) onto VALVE BODY (3) until snug against internal stop.
From under sink tighten LOCK NUT (1) to secure VALVE BODY (3).
Insert SEAL WASHERS (6) into SPOUT BODY SUPPLY HOSES (7) and
2
tighten connection to VALVE BODIES (3).
7
3
1
6


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

43 43 48 48

Designated trademarks and brands are the property of their respective owners | Disclaimer