F7000-6Lighting Systems F7000-6 Manuals


Lighting Systems F7000-6
Armstrong® TechZone™ Compatible
6.75” (17.15cm)
1
1.63”
(4.14cm)
4
5
Ordering Information
Family
Series
Type
Lamps
Color
Wattage
Voltage
Length
Options
F7
1
7
= Rectangular
= Point Source
= 1 Lamp
AL = Aluminum
= 20W HID
= 120v
= 1’ (30.48cm)
X4 = 4 Through
= 2 Lamps
WH = White
= 39W HID
= 277v
= 2’ (60.96cm)
Wires
= 4 Lamps
= 75W MR16
= 4’ (121.92cm)
X5 = 5 Through
Complete Ordering Instructions below.
Wires
Features
8. Power Feeds: Standard 18/3 power feed is rated for 10 amps. X4 power feed
1. Housing: Unitized body of extruded high-purity aluminum, partially recycled
is 18/4 and is rated for 7 amps. Observe amperage limitations and provide
pre-consumer, with die-cast ends welded in place; matched to fluorescent
additional Intermediate Power Cables, as required. When providing an
modules in the series. All modules connect and suspend like fluorescent
additional power feed, the through wiring from the previous module must be
modules.
disconnected from the cannon plug and capped.
2. Housing End: Die-cast aluminum, welded to the ends of the housing.
9. Mounting: Suspended by 1/16” (0.16cm) stainless steel cable, adjustable;
3. End Cap: Die-cast aluminum. Encloses the suspension cable and power feed
precisely modular 1’ (30.48cm), 2’ (60.96cm) or 4’ (121.92cm) suspension
cord for the end of the run.
centers; 4 1/2” (11.43cm) white canopy.
4. MR16: Lamping is 75W maximum. Transformer is electronic, 12V secondary,
Labels
120V or 277V primary (as specified) Gimbal ring provided as part of the module
UL, cUL and I.B.E.W.
and regressed into it. 45° aiming; accepts one standard Lytespan 2  (5.08cm)
filter or louver; regressed lamp pulls out for relamping. The 12” (30.48cm) 
MR16 module can be cantilevered from the end of a run of fluorescent fixtures.
5. Metal Halide: Lamping is 20W or 39W. Ballast is electronic, 20W or 39W,
as specified, 120V or 277V, as specified. Connector accepts selected
Job Information 
Type:
Lytespan PowerArc Modular Track heads. Compatible Track heads include
Job Name: 
standard Lytespan PowerArc modular track heads, which connect to the
module. 8300, 8303, 8304, 8313, 8314, 8316, and 83W4 with applicable
Cat. No.: 
reflectors. Track heads and applicable reflectors must be specified and
ordered separately, including appropriate finish. Finish is powder-coated,
baked enamel, white or aluminum, as specified.
6. Finish: Powder-coated, baked enamel, white or aluminum, as specified. 
Lamp(s): 
7. Electrical: Pre-wired with 18 gauge wires and polarized cannon plug con-
Notes: 
nectors for simultaneous mechanical/electrical connection. Factory installed
ballast disconnect allows the ballast to be disconnected from and reconnected
to incoming power under load without turning the entire circuit off.
We reserve the right to change details of design, materials and finish.


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

35 35 46 46

Designated trademarks and brands are the property of their respective owners | Disclaimer