ER 8126/1 B Manuals


Movable shelves
For replacement, use a 13amp BSI362 fuse. Only
Electrical connections
ASTA or BSI approved fuses should be used.
The walls of the refrigerator have runners so that
The plug must not be used if the fuse cover/carrier is
shelves can be positioned as desired.
Any electrical work required to install this appliance
lost. The cover/carrier is indicated by the coloured
should be carried out by a qualified electrician or
insert at the base of the plug.
competent person.
A replacement cover/carrier must be obtained from
WARNING: THIS APPLIANCE MUST BE
your local Service Force Centre.
EARTHED.
This appliance complies with the E.E.C. Directive
The manufacturer declines any liability should
No. 87/308 of 2.6.87 relative to radio interference
this safety measure not be observed.
suppression.
D040
If the plug that is fitted to your appliance is not
This appliance complies with the following
suitable for your socket outlet, it must be cut off and
Positioning the door shelves
E.E.C. Directives:
the appropriate plug fitted.
-  73/23 EEC of 19.2.73 (Low Voltage Directive)
To permit storage of food packages of various sizes,
Remove the fuse from the cut off plug.
and subsequent modifications;
the door shelves can be adjusted in height.
The cut off plug should then be disposed of to
-  89/336 EEC of 3.5.89 (Electromagnetic
To do this proceed as shown in the diagram.
prevent the hazard of shocks in case it should be
Compatibility Directive) and subsequent
plugged into a 13amp socket in another part of your
modifications.
home.
Please ensure that when the appliance is
installed it is easily accessible for the engineer in

Important
the event of a breakdown.
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow        - Earth
Blue                              - Neutral
Brown                           - Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not correspond
with the markings identifying the terminals in your
plug, proceed as follows:
GREEN & YELLOW
13 AMP. FUSE
AMP
13 

BROWN
BLUE
CORD CLAMP
D207
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
«E» or the earth symbol 
or coloured green and
yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
The plug moulded onto the lead incorporates a fuse.
6
15


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

39 39 48 48

Designated trademarks and brands are the property of their respective owners | Disclaimer