99526440A Manuals


installation instructions
read & save these instructions
WiReless dooR chime
This Package includes:

FRONT
CASE
•  Wireless Door Chime - requires 3
“D” alkaline batteries (not inlcuded)
•  Wireless Door Chime Pushbutton
NOTCH
& 2-volt alkaline battery
BACK
•  Mounting Hardware
PLATE
FeaTuRes
3. select chime melody.
•  Battery powered chime and trans-
Use the door set jumpers on the
mitter - no wires to run
pushbutton(s) to change the chime
•  Adjustable volume control
melody.
•  25-foot open air operating range
Tip: Multiple pushbuttons can be set
•  64 frequency channels to minimize
to ring a different melody for each
interference from other devices
door (up to three melodies).
•  Optional NuTone wireless push-
buttons available for multiple doors
BATTERY
PUSH
(side, rear, etc.)
BUTTON
insTallaTion
{
DOOR SET
1. install chime batteries.
JUMPERS
Remove the back of the chime case
and install three .5V alkaline, size
“D” batteries (not included). Replace
back case.
Put jumpers on pins y and x for
Westminster chime.
+
+
-
-
-
+
Put jumpers on pins y and * for 2-
note “ding-dong”.
2. install pushbutton battery.
Open the pushbutton case and install
the 2V alkaline battery (included).
To open pushbutton case: Insert a
flat-blade screwdriver into the notch
on the bottom and push to open. Lift
the front case up and away from the
Put jumpers on pins x and * for -
back plate.
 note “ding”.


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

36 36 52 52

Designated trademarks and brands are the property of their respective owners | Disclaimer