598-1172-02 Manuals


Wireless Chime
This package includes (Style of push button and chime may vary from illustration):
•  Wireless chime cover 
•  Wireless chime base
•  Wireless push button w/battery 
•  Hardware pack
You'll need to buy 3 “D” alkaline batteries for the chime. In typical use, alkaline batteries 
will last up to three years.
1.  Install alkaline type A23 12 volt push button battery. 
Remove back of case by pushing in tab on bottom with a 
small screwdriver. Make sure battery is oriented properly 
(see page 3).
2.  Remove Chime Cover (see page 4).
3.  Install 3 alkaline “D” batteries.
 Press down on imprinted 
arrows and slide battery cover to remove. Make sure bat-
teries are oriented properly.
Battery Cover
TYPE ‘D’
LR20
 
‘D’

TYPE
LR20
TYPE ‘D’
 
8
 
7
-0035-RX
TR
LR20
 
‘D’

 
6
TYPE
Mounting Holes
LR20
 
4
 
5
 
3
 
2
1
TYPE ‘D’
LR20
VOLUME
4.  Test range. Temporarily position chime and push button 
where you want them mounted. Press push button to verify 
chime and push button work properly. If chime does not 
sound, see Troubleshooting.
5.   Mount push button. Use either screws or double sided 
tape to mount push button.
•  To mount with screws, remove back of case by pushing 
in tab on bottom with a smal  screwdriver. Attach back of 
case to door jamb or wal . Snap front of push button on.
•  When  attaching  push  button  using  double  sided  tape, 
make sure the surface of the door jamb or wal  is clean.
© 2007 DESA Specialty Products™ 
598-1172-02


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

40 40 50 50

Designated trademarks and brands are the property of their respective owners | Disclaimer