WGI-D22 Manuals
INSTALL INSTRUCTIONS WGID22 INTERIOR WINDOW GUARDS 20052006 DODGE MAGNUM TOOLS REQUIRED: Power drill T25 tamperproof torx bit Drill bits – 1/8”, 5/32” Phillips screwdriver HARDWARE: QTY DESCRIPTION PART # 1 Driver Side Window Guard WGID221 1 Passenger Side Window Guard WGID226 2 Upper mounting bracket WGIMB1290 8 #10 x ¾” Sheet metal screw GSM33195 8 #10 x ½” Sheet metal screw GSM33194 4 ¼” x ½” T25 Tamperproof bolts GSM34190 4 ¼” Flat Washers GSM31005 ALWAYS! Read all instructions before installing any HavisShields Equipment Corp products. Che...


View the Manual
WGI-D23-1 & 6 Manuals
INSTALL INSTRUCTIONS WGID231 & 6 INTERIOR WINDOW GUARDS 20062007 DODGE CHARGER TOOLS REQUIRED: Power drill T25 tamperproof torx bit Drill bits – 1/8”, 5/32” Phillips screwdriver HARDWARE: QTY DESCRIPTION PART # 2 Upper mounting bracket WGIMB1290 8 #10 x ¾” Sheet metal screw GSM33195 8 #10 x ½” Sheet metal screw GSM33194 4 ¼” x ½” T25 Tamperproof bolts GSM34190 4 ¼” Flat Washers GSM31005 ALWAYS! Read all instructions before installing any HavisShields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before dri...


View the Manual
WGI-F11 Manuals
_ _ INSTALLATION INSTRUCTIONS INTERIOR WINDOW GUARD KIT MODEL WGIF7 19982007 FORD CROWN VIC MODEL WGIF11 19941997 FORD CROWN VIC TOOLS REQUIRED: Eye Safety Goggles 1/8” Drill Bit Power Drill Phillips Screw Driver HARDWARE SUPPLIED: QTY DESCRIPTION PART # 22 #10 x ½” Phillips Sheet Metal Screw GSM33194 1 Driver Side Window Guard WGIF71 or WGIF111 1 Passenger Side Window Guard WGIF76 or WGIF116 INSTALLATION: 1. First determine the correct window guard for each window. The bottom of each guard is numbered, signifying its’ location. 2. Open door an...


View the Manual
WGI-F13 Manuals
INSTALLATION INSTRUCTIONS WGIF13 INTERIOR WINDOW GUARDS FOR 20022008 FORD EXPLORER TOOLS REQUIRED: Power drill 3/16” drill bit Magic marker or pencil Safety Goggles Phillips screwdriver Snips or cutter for plastic trim 1/8” drill bit Ratchet wrench with 7/16” socket HARDWARE FOR PASSENGER DOORS (WGIF131 & WGIF136): 18 #10 X 1/2” Sheet metal screws GSM34150 INSTALLATION: (PASSENGER DOORS) 1. Hold window guard up to the window frame, and while pushing down against the door window frame, mark mounting hole locations. Remove guard and drill out mou...


View the Manual
WGI-F7-H Manuals
INSTALLATION INSTRUCTIONS WGIF7H HINGED INTERIOR WINDOW GUARDS 19982007 FORD CROWN VIC TOOLS REQUIRED: Safety Goggles Phillips Screw Driver Power Drill OpenEnd Wrench Set Drill Bit Set Magic Marker Or Pencil HARDWARE: QTY DESCRIPTION PART# 2 Driver & Passenger Side Hinged Window Guards WGIF71H & WGIF76H 2 Window Guard Mounting Brackets WGIMB2000 18 1032 x ½” Phillips Pan Head Machine Screw GSM34097 18 #10 Flat Washer GSM31003 10 1032 Keps Nuts GSM30026 10 #10 X ½” Phillips Flat Head Sheet Metal Screw GSM34150 8 #10 X ½” Phillips Pan Head Sheet ...


View the Manual
1551 Manuals
INSTRUCTIONS FOR C1550, 1551, 1553, 1554 AND C1552, C1555 SASH SETS THESE ROUTER BITS HAVE SHARP •FAILURE TO FOLLOW THESE EDGES. USE CARE WHILE GUIDELINES WILL RESULT IN SERI REMOVING THE WAXY PROTEC OUS PERSONAL INJURY. TIVE COATING. NEVER TURN ON •ALWAYS WEAR ANSI THE ROUTER WITH THE PROTECTIVE APPROVED EYE AND EAR COATING STILL ON THE BIT. PROTECTION WHEN USING THIS BIT. •THE USE OF A ROUTER TABLE IS Designed specifically for archi STRONGLY RECOMMENDED. tectural window construction, the Model C1550C1554 •NEVER FEED LUMBER WITH THE Window Sas...


View the Manual

Designated trademarks and brands are the property of their respective owners | Disclaimer