MR-20 Manuals

MR-20 Replacement Cartridge
Mineral Reduction Cartridge
MR-20 Replacement Cartridge: EV9273-69
Improves equipment life and performance by
removing at least 90%+ of all dissolved solids
using Reverse Osmosis Separation Technology
Especially useful on low capacity steamers,
warmers, small steam boilers and other
evaporative equipment that are not emptied each
Heating surfaces maintain peak heat transfer
efficiency, reducing cycle times and energy
Limits limescale build-up, which can cause
excessive machine downtime and maintenance
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
I N S T A L L A T I O N   T I P S
O P E R A T I O N   T I P S
A P P L I C A T I O N / S I Z I N G
Install vertically with cartridge hanging down
Change MR Cartridge on a regular 24 month
Mineral Reduction Cartridge for High TDS
preventative maintenance program
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Change MR Cartridge when output capacity
Capacity: 21 Gallons per Day nominal
diminishes by 15%, or when output pressure
Use piping materials suitable for high-purity
becomes too low.
Ideal for:
water after MRS System
Always flush the MR cartridge at time of
Flash steamers, conventional steamers, cheese
Refer to Installation, Operation & Maintenance
installation and cartridge change
melters, combi-ovens and coffee/espresso
Manual for cartridge flushing and RO start-up
Proper pre-treatment is required to control MR
Cartridge (membrane) scale formation and/or
    - Raw water hardness in excess of 7 grains per
gallon should be softened to extend cartridge life
    - The raw water may contain particulates and
the use of a pre-filter is recommended
Contact EVERPURE Technical Service for
pre-treatment recommendations

Big size of image:

Please install Flash player from!

42 42 50 50

Designated trademarks and brands are the property of their respective owners | Disclaimer