Cadet 2386.012 Manuals



CADET® 3 RIGHT HEIGHT™  
ELONGATED TOILET 
VITREOUS CHINA
CADET® 3 RIGHT HEIGHT™  
ELONGATED TOILET

❑  2386.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
•  EverClean® surface inhibits the growth of  
stain- and odor-causing bacteria, mold,  
and mildew on the surface
• Features the Cadet® 3 Flushing System
• 16-1/2" rim height for accessible application
• Elongated siphon action jetted bowl
• Ful y-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for 
  superior storage
• Oversized 3" flush valve with chemical 
  resistant flapper
• Chrome trip lever
• Speed Connect® tank-to-bowl coupling system
• Sanitary dam on bowl with four point 
  tank stabilization
• 2 color-matched bolt caps
• 100% factory flush tested
• 5 year warranty
SEE REVERSE FOR ADDITIONAL ROUGHING-IN 
DIMENSIONS
❑  3016.016 Right Height™ Elongated Bowl
❑  4021.016 Tank
To Be Specified:
Nominal Dimensions:  
❏ Color: ❏ White  ❏ Bone  ❏ Silver  ❏ Linen  ❏ Black
768 x 438 x 768mm (30-1/4" x 17-1/4" x 30-1/4")
❏  Seat: #5325.010 Elongated Champion® Slow Close   
Fixture only, seat and supply by others
     solid plastic seat and cover with easy lift off feature
❏   Seat: #5284.016 Elongated EverClean® solid plastic 
Alternative Tank Configurations Available:
seat and cover
❑  4021.500 Tank complete with Aquaguard Liner
❏   Seat: #5321.110 EverClean® Elongated Seat with  
❑  4021.600 Tank complete with tank cover 
Slow Close Snap-Off Hinges
     locking device
❏  Supply with stop:
❑  4021.700 Tank complete with Aquaguard Liner    
     and tank cover locking device
❑  4021.800 Tank complete with trip lever located 
     on right side
❑  4021.900 Tank complete with tank cover locking  
     device and trip lever located on right side
❑   4021.950 Tank complete with Aquaguard liner, 
tank cover locking device, and trip lever on  
right side
 
NOTES:
Compliance Certifications -
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
Meets or Exceeds the Following Specifications:
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 
SEPARATELY.
• ASME A112.19.2M for Vitreous China Fixtures - 
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
  includes Flush Performance, Ball Pass Diameter, 
IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 
  Trap Seal Depth and all Dimensions
of tolerances established by ANSI Standard A112.19.2.
• Los Angeles Department of Water and Power    
These measurements are subject to change or cancellation. No responsibility is 
assumed for use of superseded or voided page
  Supplementary Purchase Specification for
  Non-Adjustability
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND 
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE 
BUILDING FACILITIES-CHECK LOCAL CODES.

K55
© 2008 AS America Inc.
Revised 2/08


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

39 39 53 53

Designated trademarks and brands are the property of their respective owners | Disclaimer