Angled Series Consoles C-AS-1025 Manuals








 
ANGLED SERIES CONSOLES 
INSTALLATION INSTRUCTIONS 
Models C-AS-1060, 1025, 1325, 1525 & 1725 
 
TOOLS REQUIRED: 
Standard and Metric socket set with 6”extension. 
Standard and Metric wrench set 
#20 and #15 Torx driver 
 
TRAK MOUNTED CONSOLE 
 
HARDWARE: 
 QTY: DESCRIPTION: PART 

#: 
8  
¼-20 X ¾”Hex Head Bolt 
GSM33001 
 

¼” Flat Washer 
GSM31005 
 

¼” Lock Washer   
GSM31026 
 

¼-20 Hex Nut 
GSM30005 
 
2/3
INSTALLATION: 
1.  Remove inner front seat mounting bolts near transmission 
hump. Just loosen outboard bolts. 
2.  Place ¼ - 20 x ¾” Hex head bolts  into under side tracks of 
trak mount.  
3.  Position trak mount in desired location before tightening 
down hump mount. 
4.  Mount rear hump brackets to under side of trak. 
5.  Place trak with positioned hump mount brackets over 
4
transmission hump and onto front and rear seat mount 
studs. Place seat bracket on top of hump mount brackets 
and replace seat mount bolts. 
6.  Slide console up to dash and secure to trak mount with 1/4” 
hardware. 
7.  Unit is ready to accept equipment control heads. 
5
6


Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

43 43 49 49

Designated trademarks and brands are the property of their respective owners | Disclaimer