12" Two-Way Passive 60 x 60, 600W Loudspeaker System ZX3-60 Manuals

12-inch Two-Way Passive
60° x 60°, 600W
Loudspeaker System
Key Features:
•  DVX3121 12” LF Transducer with Forced Air 
•  ND2 2” Voice Coil, 1” Exit Neodymium   
Compression Driver
•  60° x 60° Coverage Pattern
•  600W Continuous (2400W Peak) Power 
•  High Sensitivity, 131 dB Maximum SPL
•  Adjustable Monitor Angle (45° or 55°)
•  2 Anchor Plates for Single Stud Fittings and  
7 Integral Suspension Points
•  Available in Black or White
•  Passive/Biamp Selectable
•  Full Line of Accessories
General Description:
Technical Specifications:
The Electro-Voice® Zx3 is the new standard of no compromise audio 
Freq. Response1 (-3 dB): 58 Hz - 15 kHz
performance and versatility in a simple to use, compact package.
Freq. Range1 (-10 dB): 48 Hz - 20 kHz
At its heart are the transducers.  First is the DVX3121 high performance 
Rec. Hipass Frequency: 50 Hz
low frequency transducer.  EV used advanced computer aided design 
Axial Sensitivity1: 97 dB (1W/1m)
techniques to create forced air, directional voice coil cooling for high 
Max. Calculated SPL: 131 dB
power and efficiency.  Finite element analysis was used to optimize the 
suspension and magnetic structure for long, linear travel to provide low 
Horizontal Coverage: 60°
distortion and greater LF extension.  These features and details, such 
Vertical Coverage: 60°
as forged magnetic components and special materials, provide reli-
Power Handling (Passive): 600W Continuous, 2400W Peak
ability with a 500W power rating in a lightweight transducer. Next is the 
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
ND2, a 2-inch voice coil compression driver based on neodymium motor 
structure to allow for maximum output while reducing size and weight to 
HF Power Handling (Biamp): 40W Continuous, 160W Peak
a minimum.  Its precision phasing plug and titanium diaphragm provide 
LF Transducer: DVX3121, 12 in (305mm) Driver
better HF performance, while the integral heatsink provides cooling for 
HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
high power output.
Compression Driver
Crossover Frequency: 2 kHz
The high tech enclosure uses injection-molded high-impact polypropyl-
Nominal Impedance: 8 Ohms
ene structural foam to make the Zx3 incredibly durable. The enclosure 
geometry elements have been carefully designed to provide maximum 
Minimum Impedance: 6.2 Ohms
rigidity and bass response. By design the Zx3 is also a perfect solution 
Connectors: (2) Neutrik Speakon NL4’s
for stage monitors by allowing two angles (45° or 55°) without any ad-
Enclosure Material: Polypropylene Structural Foam
ditional accessories.
Suspension: Enclosure has locations for 4 Single-Stud 
Attachment Plates and 10 Forged Steel 
Two coverage patterns are available; 60° x 60° coverage for long-throw 
Eyebolts - 2 on Top, 2 on Bottom, 2 on 
and cluster applications, 90° x 50° coverage for wider coverage or shorter 
Side, and 1 on Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
The Zx3 is equipped with two anchor plates for rigging with single stud-
fittings, along with two more possible anchor plate attachment points on 
Dimensions (H x W x D): 613mm x 397mm x 362mm
the bottom.  For permanent suspension or attaching brackets, the Zx3 
(24.14” x 15.64” x 14.26”)
also has two M8 inserts on the top and bottom, two under the handle, 
Net Weight: 19.8 kg (43.7 lbs)
and one on the back of the enclosure, for a total of 7.  All versions are 
Shipping Weight: 22.1 kg (48.6 lbs)
available in black or white.
1 Half Space Measurement.

Big size of image:

Please install Flash player from http://get.adobe.com/flashplayer/!

39 39 52 52

Designated trademarks and brands are the property of their respective owners | Disclaimer